2 pcs 5-step sequential retrofit flash module car motorcycle turn signal light

12V 5 LED OUTPUTS 5 x 12w 1A 2 pieces 12V 5 LED OUTPUTS 5 x 0.5w 0.1A Each led will come on after previous and when all led come on -they will turn off and start from begining. To see how it works go to: https://youtu.be/jLvyXsaq-cA https://youtu.be/jLvyXsaq-cA
Manufacturer: Deselectra
€14.60
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

Item Description

2 pieces 

12V 5 LED OUTPUTS 5 x 0.5w 0.1A 

Each led will come on after previous and when all led come on -they will turn off and start from begining.  

To see how it works go to: https://youtu.be/jLvyXsaq-cA

This circuit can be used to indicate left and right turn on a car, motorcycle, motor-bike. Two identical circuits will be needed, one for left and one for right.

Each led will come on after previous and when all led come on - they will turn off and start from beginning.  

Power:  + ,  -  Have protection against reverse supply voltage.  (Black and Red wires)

Direct  12V Outputs 0.10A - can carry powerful diode up to 0.5w each ( 5 x 0.5w)

Orange - common positive , 5x white - negative

If you use  led  1.8V diodes  must be soldered 330 ohms resistor, regarding  wiring diagram

Power supply - 12V DC

 

With trimmer is adjusted the time when all diodes is on.

The module start with power on. For the led light can be used led strip,  or separate diodes – for example 5 x 2 led.

The kit is assembled and ready for use. 

 

 Package contents:

1. turn signal module - 2 pcs

2. Instruction for use and wiring diagram.